Saturday, March 31, 2018

Transfer Flow - Our Fuel Tank Categories



Transfer Flow manufactures the world's finest fuel tank systems for automotive manufacturers, commercial fleets, and drivers just like you who are looking for a quality solution to provide more fuel capacity and driving range.

Wednesday, March 28, 2018

Harbor Service Body - Keeping It Out Of Sight, Out Of Mind!



This is an example of a Service Body with a raised cargo bed enclosure fitted with barn-style rear doors, and a 3-piece cargo bed enclosure that opens up two thirds of the bed area when needed. This is a great way to keep things carried in the back area out of sight and out of mind.

This Harbor 8' single rear wheel Service Body also sports some great built-in drawers in the streetside front compartment, HD material rack with Rack-Straps on both sides, class IV receiver, and more.

Take the tour courtesy of Mike Olin of the Paradise Fleet team by watching the video.

See more great trucks at http://www.ParadiseWorkTrucks.com

Sunday, March 25, 2018

11 Foot x 56" High Harbor Trademaster



This Red Ford has a 56" high custom Trademaster service body with raised front compartments on both sides, two upper compartments that open upward for maximum visibility. This is also a horizontal series body where the horizontal compartment goes to the end of the body. This is perfect for longer items. This unit also has a 3-piece Cargo Bed Enclosure keeping what is inside secure and out of view.

Harbor offers standard TradeMaster with the 8' and 9' Single Rear Wheel models, along with 8', 9', 11' Dual Rear Wheel models. We also offer a 6.5' for HD short bed trucks and a 13' for longer wheelbase trucks. Since we manufacture this product, we can build bodies to specific needs, but the standardized models will be the most cost-effective generally.


To find out more, you may call Harbor Truck Bodies at 800-433-9452.
Also find us at http://htbi.net/

Thursday, March 22, 2018

Meet NTEA's 54th President - Todd Davis



Meet NTEA President Todd Davis, executive vice president, Phenix Truck Bodies and Van Equipment of Pomona, California.

Monday, March 19, 2018

2018 Ford F-150: Overview | F-150 | Ford



From updates to the grilles, tailgate, updated smart technologies, and our most advanced engine lineup ever, see how the new 2018 Ford F-150 doesn’t just raise the bar, it is the bar.

Friday, March 16, 2018

HVAC and Plumbimg Contractors - Van Storage for Gas Bottles, Ladders and Everything Else - Harbor Truck and Van





Plumbing Heating and Ventilation service technicians need to carry bottles of Nitro, CO2 or Brazing torch gases to pressure test systems, purge a system, blow out coils, or solder or repair lines. The Electrical/Telecom package is designed to satisfy your need with a 3-tank holder mounted off the rear shelf  panel, four (4) drawer packs, and a lockable storage compartment for valuable components. How about adding a drop-down rack for your different size ladders that help you get to that system? Keep your tanks at 40 cu.ft. or less if you have to carry them up the ladder!




Find more at: htbi.net



Saturday, March 10, 2018

Ford Uses Allen Park Climatic Wind Tunnel to Prepare Vehicles for Winter




DEARBORN, Mich., – With Old Man Winter on his way, Ford vehicles are ready to meet the harsh demands of extreme cold and heavy snow. That, in large part, is thanks to the company’s climatic wind tunnel, which tests the winter-readiness and reliability of Ford vehicles in blizzard-like conditions. Ford moved snow testing to the Allen Park, Michigan facility in 2006.

Engineers bring the outdoors in

The climatic wind tunnel allows Ford to take cold weather testing off the roads and conduct it inside, where engineers can replicate wintry conditions year-round. At the facility, all Ford vehicles – from F-150 to Fiesta – are subjected to worst-case winter scenarios so they are prepared to navigate snowstorms.

Engineers simulate conditions from extreme freezing to blistering desert temperatures, from as low as minus 40 degrees Fahrenheit to as high as 130 degrees Fahrenheit. Wind testing conditions can reach hurricane-like speeds of up to 125 mph, blowing snow at the front of the vehicle to simulate a blizzard.

To simulate worst-case scenarios, Ford vehicles are required to carry a full load of passengers and cargo. Some are made to tow heavy loads in these conditions.

Since snow can choke a vehicle’s engine, engineers continuously monitor air intake. The team also checks whether shift linkages freeze up, and where on the vehicle snow accumulates.

Besides a four-hour test in the climatic wind tunnel, Ford vehicles also undergo two days of snow-related testing in the Upper Peninsula of Michigan, near Sault Ste. Marie.

Equipped for slip

Ford prepares its vehicles to conquer winter with a stellar set of features, including a heated steering wheel, and heated front and rear seats available for Ford Explorer, as well as front and rear camera washers.

What’s more, Explorer’s intelligent four-wheel drive with Terrain Management System™ reassesses conditions about 20 times faster than the blink of an eye, providing precise handling and traction. The driver uses a dial on the center console to shift on the fly, selecting among four terrain management modes – normal, sand, mud and, of course, snow.

Ultimately, these features, along with the performance and endurance tests all Ford vehicles undergo, help ensure each one will perform safely and reliably – no matter the weather.

About Ford Motor Company

Ford Motor Company, a global automotive industry leader based in Dearborn, Mich., manufactures or distributes automobiles across six continents. With about 197,000 employees and 67 plants worldwide, the company’s automotive brands include Ford and Lincoln. The company provides financial services through Ford Motor Credit Company. For more information regarding Ford and its products worldwide, please visit www.corporate.ford.com.

Sunday, March 4, 2018

Highway Products Toolbox - Removable Tool Tray


Tool trays made of plastic will crack, bend and break. These durable aluminum tool trays sit high on the tool box for easy access. The easy-to-grip handle enables you to remove the tray or you can slide it to the side. This simple, yet functional design allows you to organize smaller items that would normally get lost on the bottom of your tool box.

Thursday, March 1, 2018

Exxpand Boxxes: T-Boxx


Learn about the advantages of utilizing an Exxpand T-Boxx for parts storage in your work vehicle.